Advance Bloomery

This page is Related

	This tutorial is written for modpack version 0.4.6, but is still valid now (0.5.6-rc2-hf2 ).
	As long as the modpack updates, Its contents may be outdated.

Overview

bloomeries were widely used in the early gameplay, but many people believed that bloomeries had to be watched at all the time to be successful, which undoubtedly lost a lot of efficiency.

It is recommended that players who are already familiar with the bloomeries and can successfully forge iron 100% try it.

Parameters of bloomery

There is 1200 air storage inside each layer of the bloomery, and 180 air is generated by one bellow and evenly distributed to each layer (in fact, it can only be the upper and lower layers of the outlet). The bloomery consumes 1 air per tick, and it takes 4000 ticks to complete the work of the bloomery. If the bloomery consumes more than 2000 air during the work, it can be successful. Iron will cool down in 1000ticks.

Optimization method

1. If it is a single-layer bloomery, you only need to blow it 6 times first, and then blow it every 8-30 seconds for 6 times, 12 times in total. The double-layer is blowing 12 times first, and then blowing once every 4-15 seconds.
2. Blow 6 times first, then blow 6 times after about 50-90 seconds. The number of double layers can be doubled each time.

After burning for a total of 200s, complete mining within 50s to succeed.